Zurück zur Liste

Stellenbeschreibung

Software Support L2 Engineer - Robotic Hands (human) in Muenchen, Deutschland

neura-robotics-gmbh

Muenchen, Deutschland

Your mission & challenges

BU-Hands builds the robotic hands for our humanoid 4NE-1 and our cognitive robots, and delivers them to internal robot teams and external customers. As our hands move from prototypes into series production, you take over the firmware, SDK and communication issues that 1st level service cannot solve. You reproduce the problem, find the root cause and either fix it yourself or hand it to our developers with a clear reproducer. Your goal: the same issue never reaches you twice.

  • Escalation ownership: Own tickets escalated from 1st level service, RMA and field teams. Triage them, reproduce them on a bench hand and close them or route them to development.

  • Embedded troubleshooting: Debug firmware on ARM Cortex-M MCUs with JTAG/SWD, read crash dumps, fault registers and RTOS traces, and check motor control, sensor readout, boot and firmware update behaviour.

  • SDK & integration support: Support internal robot teams and customers integrating our hands through our SDK, including reviewing their code and configuration.

  • Communication analysis: Analyse traffic between hand and robot to separate wiring, timing and protocol faults.

  • Fault routing: Work with test engineering and the RMA bench to decide whether a fault is electrical, mechanical or software, and route it to the right owner.

  • Fixes: Write small firmware and SDK fixes with tests and code review, and verify them in the field.

  • Diagnostic tooling: Build tools and scripts for log collection, health checks and firmware flashing that 1st level can run without you.

  • Knowledge & feedback loop: Turn every solved issue into a known-issue entry, troubleshooting guide or release note, and report recurring faults to product management with numbers.

  • On-site support: Travel to customer sites and NEURA locations when a remote session cannot solve the problem.

What we can look forward to

What you bring:

  • Education: A degree in Computer Science, Electrical Engineering, Mechatronics or a related field.

  • Firmware experience: 3+ years writing or supporting C/C++ firmware on ARM Cortex-M or similar MCUs, including RTOS-based systems.

  • Structured troubleshooting: You can walk us through hypothesis, test and evidence on a root cause others missed.

  • Lab tools: Hands-on with JTAG/SWD debuggers, oscilloscopes, logic analysers and Wireshark, and able to read schematics well enough to probe a board.

  • Developer support: Experience supporting developers who use your libraries or APIs: reproducing their setup, reading their code and explaining the fix.

  • Tooling: Comfortable on the Linux command line, with Python for test and log analysis scripts, and Git.

  • Protocols: Working knowledge of at least one fieldbus or real-time protocol, such as EtherCAT, CAN/CAN-FD or Ethernet-based protocols.

  • Communication: Clear written reports and a calm manner on calls with frustrated users.

  • Languages: Very good English skills; German is a plus.

Nice to have:

  • ROS 2: Experience with ROS 2 and robot-side integration of grippers or hands.

  • Industrial Ethernet & embedded Linux: Previous work with industrial Ethernet stacks or embedded Linux.

  • Motor control: Understanding of BLDC motor control and sensor data paths, to tell a control bug from a hardware fault.

  • Support processes & safety: Exposure to support processes (ticketing, SLAs, known-error databases) and to functional safety (ISO 13849, IEC 61508).

Ähnliche Stellenangebote

Mehr wie diese Stelle

Deine Mission & Herausforderungen BU-Hands entwickelt die Roboterhände für unseren Humanoiden 4NE-1 und unsere kognitiven Roboter und liefert sie an interne Roboterteams und externe Kunden. Während unsere Hände vom Prototyp in die Serienproduktion gehen, übernimmst du die Firmware-, SDK- und Kommunikationsprobleme, die ...

Muenchen, Deutschland

  • Vor Ort
  • Vertrag
  • IT
... business information. Contribute to application releases and Disaster Recovery activities when required. Your profile Strong professional experience in Application Support, Production Support or Application Operations, ideally at Level 2. Hands-on experience investigating and managing production incidents. Good practical understanding ...

Deutschland

  • Remote
  • Vollzeit
  • Vertrag
... selbst technisch und im Kundenkontakt aktiv. Our Objectives and your Role: Ein unternehmensweites Supportmodell auf- und ausbauen. Du baust das Team Product Support (L2) auf und aus, führst es fachlich und disziplinarisch, organisierst die Zusammenarbeit mit rotierenden Engineers und schaffst klare Zuständigkeiten zwischen ...

Muenchen, Deutschland

  • Vor Ort
... perform tasks based on verbal and visual cues. - Test and refine models under real-world conditions to ensure reliability and effectiveness. - Collaborate with software engineers and roboticists to integrate these systems into larger automation solutions. - Contribute across all phases of the development lifecycle, from initial ...

Potsdam, Deutschland

  • Vollzeit

81000 - 121000 $

... modeling software. - Experience with robotic laser welding cells. - Familiarity with AWS or ISO weld codes. Job Titles That Should Apply Advanced Manufacturing Engineer, Process Engineer - Welding, Laser Welding Engineer, Welding Process Engineer, Manufacturing Engineer - Welding, Weld Process Development Engineer, Laser Process ...

Soest, Deutschland

  • QA
... cases. - Execute manual and automated tests for distributed, real-time robotic systems running on embedded and cloud-connected platforms. - Work closely with software, robotics, AI, and system engineers to identify issues, reproduce defects, and support root-cause analysis. - Contribute to the validation of safety-related ...

Riederich, Deutschland

Metal Improvement Company, Surface Technologies / Curtiss-Wr...

Operator / Maschinenbediener Robotic (m/w/d) in Unna

  • Vollzeit
Operator / Maschinenbediener Robotic (m/w/d) für unsere Werke in UnnaDas sind wir!Curtiss-Wright ist seit 1929 eine echte Legende im kontrollierten Kugelstrahlen für globale Marktführer aus den Branchen wie Luft- und Raumfahrt, Energie, Automotive und Verteidigung. Für unser Werk in Unna suchen wir Verstärkung, die keine ...

Unna, Deutschland

  • Hybrid
About the Role As a Senior Deployment Engineer at ARX Robotics, you will take our autonomous and software-defined ground systems from the lab into the field. You will be the technical bridge between our engineering teams and the military and security partners who operate our robotic platforms. Your work ensures that our ...

Muenchen, Deutschland

  • Hybrid
About the Role As a Senior Deployment Engineer at ARX Robotics, you will take our autonomous and software-defined ground systems from the lab into the field. You will be the technical bridge between our engineering teams and the military and security partners who operate our robotic platforms. Your work ensures that our ...

Muenchen, Deutschland

  • Remote
  • Hybrid
  • Vor Ort
  • Vollzeit
  • IT

$2k USD / year

... interesting locations around the world, to align on strategy and execution. The company is founder led, profitable and growing. We are hiring 2025 and 2026 Graduate Software Engineers into engineering teams around the world. As a global platform company we offer a wide range of software engineering challenges, in both open source ...

Deutschland